A molded PE closure in which a projecting rib is pressed into a mating channel, so the pack can be opened and closed again and again. 17 profiles from 11 mm to 35 mm (1.1–3.5 cm) total width, supplied on reels.
Choose from 17 zipper profiles in six families. Every profile is supplied on reels for automatic pouch-making and form-fill-seal lines, with custom width, colour, print and reel length available.
A zipper pouch is a flexible pouch with a molded-in-place sealing device: a projecting rib or fin is inserted into a mating channel to effect the closure, and that seal can be repeatedly opened and closed.
The zipper is a consumer reclosure, not the package’s primary hermetic seal. The intact top seal above it protects the unopened product. After opening, the zipper limits spills and exposure to air — it does not replace the original seal. Barrier and leak performance should therefore be specified against the finished pack, not against the profile on its own.

















The same profile performs differently depending on fill weight, storage temperature and how the consumer opens the pack. These are the markets we quote most often.
Large-format kibble and treat bags. Wide press-to-close, eight-sided sealed and slider profiles, specified for moisture control.
Low-temperature grades that still open and reclose cleanly after storage at −18 °C.
Reclosure on the aroma path, paired with a one-way degassing valve in the film.
Moisture control for crisp products, with powder-tolerant profiles for coated and seasoned snacks.
Detergent powders, capsules and refill pouches, where a firm reclose matters more than oxygen barrier.
High-strength reclosure for mail-order food, subscription packs and sample pouches.
Zipper profiles are attached to the pouch through flanges. Premade-pouch converters can insert the zipper during pouch making, while form-fill-seal lines may use zipper already applied to the film, or equipment that attaches it inline. Flange width, sealant compatibility, application temperature and position tolerance all affect seal quality.
The zipper area contains multiple layers, creating transitions where sealing pressure and temperature have to be controlled. Poor application causes distorted profiles, weak flange seals, channels at the side seals or puckering — which is why most “zipper leaks” are really sealing problems rather than profile problems.
Tell us your pouch construction and we will supply cross-sectional leak and seal-strength checks near the zipper endpoints with the sample, so your line can be set up against data instead of guesswork.
Width is the total profile width including the flange — please confirm which dimension you need when comparing against another supplier’s drawing. Weight is grams per metre of profile (g/m), not the weight of one bag’s zipper.
| Product | Family | Material | Width (total) | Weight | Typical application |
|---|---|---|---|---|---|
| Easy Tear Edge Zipper | Side Pull Zippers | PE | 20 mm (2.0 cm) | 7 g/m | Betel nut bag |
| Low Temperature Zipper Pull | Side Pull Zippers | PE | 19 mm (1.9 cm) | 9 g/m | Dental floss bag |
| H-Shaped Waterproof Edge Zipper | Side Pull Zippers | PE | 20 mm (2.0 cm) | 8 g/m | Sliding lock bag |
| Eight-Sided Sealing Hook-and-Loop Zipper | Hook-and-Loop Style Zippers | PE | 22 mm (2.2 cm) | 15 g/m | Food packaging bag |
| Eight-Sided Sealing Hook-and-Loop Zipper | Hook-and-Loop Style Zippers | PE | 15 mm (1.5 cm) | 13 g/m | Food packaging bag |
| Concave-Convex Zipper | Concave-Convex Zippers | EPE | 13 mm (1.3 cm) | 5 g/m | Food packaging bags, daily necessities packaging bag |
| Concave-Convex Zipper | Concave-Convex Zippers | PE | 11 mm (1.1 cm) | 4.5 g/m | Food packaging bags |
| Concave-Convex Edge Zipper | Concave-Convex Zippers | PPE | 13 mm (1.3 cm) | 4 g/m | Food packaging bags, daily necessities packaging bag |
| Sealed Bag Zipper | Sealed Bag Zippers | PE | 25 mm (2.5 cm) | 10 g/m | Food storage bag |
| Sealed Bag Zipper | Sealed Bag Zippers | PE | 27 mm (2.7 cm) | 9 g/m | Food storage bag |
| Sealed Bag Zipper | Sealed Bag Zippers | PE | 35 mm (3.5 cm) | 12 g/m | Food storage bag |
| Double Tooth Sound Bone Zipper | Double Tooth Zippers | PE | 27 mm (2.7 cm) | 10 g/m | Food storage bag |
| Double Tooth Waterproof Zipper | Double Tooth Zippers | PE | 22 mm (2.2 cm) | 12 g/m | Food packaging bags, food storage bag |
| Double Tooth Vacuum Zipper | Double Tooth Zippers | PE | 30 mm (3.0 cm) | 14 g/m | Food vacuum bag, vacuum storage bag |
| 3mm Bone Zipper | Other Zippers | PE | 3 mm (0.3 cm) | 3 g/m | Daily necessities packaging bag |
| Eight-Sided Sealed Pet Bag Slider Zipper | Other Zippers | PE | 30 mm (3.0 cm) | 25 g/m | Cat and dog food bags, pet bags |
| Easy Tear Zipper | Other Zippers | PE | 20 mm (2.0 cm) | 11 g/m | Food storage bag |
Most suppliers make either the film or the zipper. We run both, which shortens the qualification loop: the sealant layer of the film and the flange of the profile can be matched before you run a trial, instead of being reconciled afterwards between two suppliers.
Consumers say they will pay more for reclosable packaging — a reclosure is often the cheapest way for a brand to add perceived value to a pouch it already sells.
Source: Fresh-Lock consumer research — “Consumers will pay 14% more for reclosable packaging”.The closure should be backed by data, not by a datasheet. Our food packaging zipper profiles are tested by Zhejiang Fangyuan Test Group (National Center of Quality Inspection for Prepackaged Foods, Zhejiang) against our published enterprise standard Q/ZHC 001-2026. Two current reports cover the PP grade and the PE grade, so the zipper that goes into your pouch carries the same kind of independent evidence as the film behind it.
Zipper — PPFood packaging zipper · report summary
Zipper — PEFood packaging zipper · report summary
Zipper — PPReport cover
Zipper — PEReport coverAvailability depends on the profile and the order volume — tell us the application and we will confirm what we can supply.
No. The zipper is a consumer reclosure that can be repeatedly opened and closed. The pack’s original hermetic protection is the intact top seal above the zipper. Please specify barrier and leak requirements against the finished pack.
Grams per metre of profile (g/m) — the standard way the industry quotes zipper weight. It is not the weight of one bag’s zipper.
Widths are often measured differently. Our figures are the total profile width including the flange; some suppliers quote the profile body only, which is narrower. Ask us for a cross-section drawing before comparing.
Yes. We produce PE and CPP film and zipper profiles, so the sealant layer and the flange can be matched and supplied together. We can also quote pre-applied zipper rollstock.
Child-resistant performance is certified for a complete package — container plus closure — not for a zipper on its own, so no zipper supplier can claim CR certification for a profile. We can supply profiles designed for child-resistant applications; testing is carried out on the finished pack.
Press-to-close profiles are designed for repeated consumer use. Tell us your target number of open/close cycles and the fill weight, and we will confirm what the profile can support.
Share your pouch format, total width and application. Our team will recommend the right closure and send samples for trial.